 | 4 Clamped Quick Disconnect Fitting
For use with 4' hose and hose clamps (sold separately). Flared end allows you to quickly connect or disconnect any woodworking machine or fitting with a standard 4 port. 63577 (not pictured) has one end with threads that fit our 2-1/2' clear hose, while the opposite end is flared for standard 4' ports.
|
|
 | 4 Dust Coupling
Allows you to connect two 4' fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Coupling has 4 ID on each to accept 4 OD fittings. Plastic.
|
|
 | 4 Spring Hose Clamp
1-3/4' long bolt tightens wire clamp into 4' dust collection hose. Yellow chromate finish. Comes in a pack of 5 clamps.
|
|
 | 4 Threaded Quick Disconnect Fitting
Reverse threads provide a secure fit for 4 black hose ? no need for metal hose clamps. Flared end allows you to quickly connect or disconnect any woodworking machine or fitting with a standard 4 port. 63577 (not pictured) has one end with threads that fit our 2-1/2' clear hose, while the opposite end is flared for standard 4' ports.
|
|
 | 412 3 Keyed Hose Clamps
Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system easier! 5 per pack.
|
|
 | Adjustable Hose and Pipe Hangers
These sturdy pipe hangers with a J-hook design allow you to hang your pipes and hoses from joists or along the wall. Fully adjustable.White plastic.Comes in packs of 5.
|
|
 | Air Filtration Brackets
Use your home furnace filters to pre-filter your air filtration system with these unique brackets!
|
|
 | Clear Flexible Dust Collection Hose
Available in 2-1/2 and 4 diameters and 10 foot lengths. Wire reinforced. One foot length available for short leads on power tools with hard to reach dust ports (4' diameter).
|
|
 | Counter Dust Brush
Get superior sweeping action picking up fine dust and debris! The full 13' length cleans up a large surface quickly. Brush is manufactured of polypropylene in a sandalwood color and filled with copper colored plastic bristles. A total of 73 tuffs of fill, trimmed to a bristle length of 2 - 1/2'. Total length is 13 - 3/8 ' with a bristle area of 9' long X 3 - 1/2' wide'.
|
|
 | Delta 112 HP Dust Collector Model 50850
Delta Industrial Model 50-850 1 1/2HP Dust Collector includes a 1 1/2HP motor and blower, one 5-micron filtration bag, two plastic 6 mil. chip bags, support drum, two 4 diameter dust intake ports, one 6-foot hose, 1 intake port cap, base, four swivel caster assemblies, cord and plug, and instruction manual
|
|
